Store
Blue - Gallon or Pint (16 OZ) ounce REGULAR KOTTON KLENSER Wood Cleaner antique cabinets paneling formica ceramic plastic tile vinyl leather marble white wallsProduct DetailsMPN: J-3410REGULAR KOTTON KLENSER CLEANER
Your Choice of a Pint Jar (16 oz) or a Gallon Tub
Non-abrasive, biodegradable, non-toxic, non-flammable.
Great multipurpose cleaner all around. You can use it on all Wood finishes - kitchen cabinets, woodwork, paneling and Formica, ceramic and plastic, tile, vinyl, leather, marble, painted surfaces, whitewall tires.
Cleans and removes water and heat marks, wax and silicone buildup, tree sap, and smoke damage residue
Sold Individually by the 16 ounce Jar --- We also offer a metal and protective wood feeder by the Kotton Klenser Brand.
No returns on liquids or any Kotton Klenser products
J-3410
Cleaning Woods
CAUTION: To get the results you desire from each Kotton Klenser™ product, always begin with an unnoticeable spot on the piece first. Regular Kotton Klenser™ - like other products - can remove a finish if not handled with care. Be sure to remove cleaner completely after use. It is recommended that you use gloves when using Kotton Klenser™ products.
REJUVENATING ORIGINAL OIL, WAX, OR VARNISH FINISH ON WOODS
STEP 1
Apply Regular Kotton Klenser™ in manageable small area(s) of the piece with a paint brush (in case of heavily dirt-coated or damaged finishes, apply with gloves and 4/0 steel wool). Leave on a few minutes or only long enough to clean; wipe off thoroughly. In cases of stubborn dirt, rub with 4/0 steel wool; repeat process if necessary.
STEP 2
Apply Kotton Klenser™ Protective Wood Feeder with a brush. Let Feeder absorb into the wood (absorption time can vary from 6 to 12 hours). If wood absorbs the first coat immediately, reapply Protective Wood Feeder. After wood has absorbed the fine oils and conditioners, wipe excess Protective Wood Feeder off and buff following grain of wood with 4/0 steel wool.
STEP 3
Maintain the beautiful finish with regular applications of Kotton Klenser™ Lemon Oil Beeswax Polish. Use a soft cloth to apply Lemon Oil Beeswax Polish and absorb excess.
FOR REJUVENATING DAMAGED, ORIGINAL VARNISH FINISH ON WOOD (Checking or crocodile)
NOTE: Sometimes a finish in this condition is simply laying loosely on the wood. Regular Kotton Klenser™ will lift loose finish and leave intact only the finish that is still adhering to the wood.
STEP 1
Apply Regular Kotton Klenser™ liberally; let sit as long as 24 hours or until damaged finish is softened. Rub softened finish with 4/0 steel wool until heavy damage is rubbed off; finish rubbing until smooth with 4/0 steel wool. (Always follow grain of the wood.)
STEP 2
Apply Kotton Klenser™ Protective Wood Feeder; let wood absorb until it can absorb no more (this can be 6 to 72 hours). Wipe off excess with soft cloth, then buff off with 4/0 steel wool following grain of wood.
STEP 3
Apply Kotton Klenser™ Lemon Oil Beeswax Polish on a regular basis to keep wood in excellent condition. Use a soft cloth to apply Lemon Oil Beeswax Polish and absorb excess.
HIGH-GLOSS FINISHES (Oriental Lacquer Finishes, Mahogany, etc.)
Regular Kotton Klenser™, if used very carefully, will remove dirt, wax, smoke stains and grease from these finishes. Always be careful to work a small area at a time so as not to dull the hi-gloss or lacquer finish, and be sure to remove all cleaner from surface after use.
Kotton Klenser™ Lemon Oil Beeswax Polish will not restore nor maintain a hi-gloss finish. It is suggested that only an oil polish be used to maintain a hi-gloss finish.
UNFINISHED OR STRIPPED WOODS
Kotton Klenser™ Protective Wood Feeder can be used to give a natural wood finish to unfinished or freshly- stripped woods. When doing this, try an unnoticeable, small area to see if the results are what you desire. Keep in mind that some woods (especially some oaks) have acids which tend to not be compatible with Protective Wood Feeder. Follow the directions in Step 2 under Woods after making the determination to use Protective Wood Feeder for a natural wood finish.
ANTIQUING KIT FINISHES
Regular Kotton Klenser™ will not restore or repair an antiquing kit finish.
Red - Gallon or Pint (16 OZ) ounce KOTTON KLENSER METAL CLEANER grease copper pewter marble nickel brass chrome aluminum stainless bronze tin steel.Red - Gallon or Pint (16 OZ) ounce KOTTON KLENSER METAL CLEANER grease copper pewter marble nickel brass chrome aluminum stainless bronze tin steel.$12.24
Kotton Klenser Steel Wool 4/0000 Steel Wool (6 per package) cleaning feeding maintenance metal wood oil wax antique cabinets paneling formica ceramic plastic tile vinyl leather marble white wallsKotton Klenser Steel Wool 4/0000 Steel Wool (6 per package) cleaning feeding maintenance metal wood oil wax antique cabinets paneling formica ceramic plastic tile vinyl leather marble white walls$4.08
Store Information:
Each Store Category will open a list of all new products.
The main store categories each have a sub store category with like or similar products.
Example: The furniture parts store category is a vague title. In there you will find a hardware for pulls, knobs, hinges, locks, keyhole covers, etc.
You can do a whole store search by using the Search Bar. You can type in the SKU number of your furniture parts or hardware keywords and if the items are our store, they will be returned in the search results.
The availability of all items in our store is always accurate and up-to-date.