Store
8oz TAMBOUR GLUE roll top desk slat twill cloth flex adhesive wood leatherProduct DetailsMPN: FK-TG-1This special formula tambour glue is a commercial grade adhesive. It is formulated for the furniture industry and is ideal for gluing the cotton cloth/twill tape backing to tambour door slats. This multi-purpose adhesive is flexible when cured and can be used for bonding wood, leather, cloth and other porous materials.
(**CHECK THE SECOND PICTURE FOR MORE INSTRUCTIONS ON HOW TO APPLY THE GLUE OR SEE BELOW**)
Dries Clear and Flexible.
Sold Individually in 8 ounce bottles only. (One bottle should do approximately about 20 linear feet of our 3 inch twill tape)
***NOTE*** Like, a lot of our liquids, This Tambour Glue can not be returned, and not refundable***
FK-TG-1
DIRECTIONS: One 8oz. bottle is designed to cover approximately twenty linear feet of our TW-3 webbing.
Clean all debris from wood, including old glue and fabric.
Clamp slat pieces tight and flush on the back side.
Cut fabric approximately 1-1/2 inches longer than the door itself. Fabric should run perpendicular to the wood slats. Mark area where fabric will be applied.
Drizzle glue into marked area, and spread with paint brush. Being careful not to push glue between slats. Apply fabric, and smooth with roller to remove bubbles.
Let dry approximately 8 hours.
KEEP OUT OF REACH OF CHILDREN
Store Information:
Each Store Category will open a list of all new products.
The main store categories each have a sub store category with like or similar products.
Example: The furniture parts store category is a vague title. In there you will find a hardware for pulls, knobs, hinges, locks, keyhole covers, etc.
You can do a whole store search by using the Search Bar. You can type in the SKU number of your furniture parts or hardware keywords and if the items are our store, they will be returned in the search results.
The availability of all items in our store is always accurate and up-to-date.